Tyron Power Services provides comprehensive Power Cable Testing services as part of our Electrical Testing and Maintenance services. We perform Power Cable Testing for industrial plants, large commercial facilities and municipal power stations. We are available 24 hours a day, seven days a week and are maintenance manager’s first choice for electrical testing, maintenance and repair.
About Power Cable Testing
The purpose for power cable testing is to ensure that power cable insulation is intact and operating efficiently. Cables are tested for durability, reaction to high voltage, and detection of partial discharges. TPS provides power cable testing for medium and high voltage AC cables that range upwards to 500 kilovolts. Our tests are factory grade and are on par with manufacturer’s quality standards. Approximately 99% of cable related failures occur as a result of improper installation during the commissioning of new electrical equipment. TPS’s comprehensive testing program can ensure that potential problems are dealt with before further harm can be done. Cables also require maintenance and restoration as they age. TPS can pinpoint healthy cables from cables in need of repair. From small lacerations, to punctures within the cable that leads to discharge of current, TPS provides preventative measures to ensure longevity for power cables.
Power Cable Testing Method
The testing method for power cables depend on the type of material that the cable is made from. ITI identifies specific testing procedures for a wide variety of cables based on their make. From Cross linked polyethylene cables to traditional copper cables. We also try to specific testing procedures based on the overall thickness of the cable.
Three basic errors that occur in cable assemblies are open, shorts, and miss wires. Low voltage tests can only detect shorts if they are touching each other. In many instances, we have nicked, stray wires, braided shielding, or contaminants that can cause wires to be very close but not dead shorted. High voltage tests can find near shorts that low voltage tests cannot because inducing a higher voltage to a cable increase the pressure in that cable. The saying pressure bursts pipes apply in this instance because the higher voltage exposes nicks within the cable since an increase in voltage corresponds to more current passing through the cable. As more current passes through, the likelihood of identifying leaks within the cable increases.
Benefits of Power Cable Testing from TPS
- All personnel on the job are certified technicians in congruence with NETA standards
- A Registered PE (professional Engineer) will proof read all engineering reports and calculations
- All testing procedures will be within NETA specifications and done with objectivity and precision
- Safety is the top priority for both our employees on the job and employers liable for the employees
- Fees are competitive and honest
- Voltage and Current specifications will be on par with manufacture recommendations prior to installation
- Peace of mind that equipment is safe for employees to use
Tyron Power Services Providing Power Cable Testing To Abuja And Nationwide
With offices in Abuja, Tyron Power Services provides Power Cable Testing services to clients throughout Nigeria including Lagos, Port Harcourt and Aba as well as Lokoja. We serve industrial, commercial and municipal clients in various industries including power stations, power plants, wind and solar, petro-chemicals, manufacturing, hotels, hospitals, municipalities, defense contractors, data centers and many other applications that rely on high power electric equipment. Whatever your Power Cable Testing needs may be, contact us and we will make sure that your equipment is treated with the care and safety requirements that it deserves. See our full line of electrical testing.